Weforma WBE 100-E1 Industrial Single Convoluted Stamping Machines and Presses Air Bag

Product Introduction

Air spring is a sealed container filled with compressed air, using the compressibility of gas to achieve its elastic effect. Commonly known as air bag, air bag cylinder, cylinder and so on. 1B4060 can replace Contitech FS 40-6. They have It is a double convoluted air - bag spring. It consists of a rubber air bag with cord and compressed air enclosed in it. The inner layer of the airbag is made of air-tight rubber, while the outer layer is made of oil-resistant rubber. A steel waist ring between the joints prevents radial expansion of the middle part and prevents friction between the two joints. In addition to the two, there are single, three and four convoluted air springs. The more nodes, the better the elasticity.

Product Specifications

Diameter of the Top Cover Plate: 90 mm
Center-to-Center Distance of Screws on the Top Cover Plate: 20 mm
Diameter of the Bottom Cover Plate: 90 mm
Center-to-Center Distance of Screws on the Bottom Cover Plate: 20 mm
Screw (Nut) Thread Count for the Top Cover Plate: 2×M8×1.25
Screw (Nut) Thread Count for the Bottom Cover Plate: 2×M8×1.25
Air Inlet: G1/8
Max Diameter of the Rubber Bellow: 145 mm
Maximum Height: 110 mm
Minimum Height: 50 mm

Other OEM Number

The Pros of AIRSUSTECH Convoluted Air Bellows

Compared with spring, air spring shock absorbers have the following advantages:

1. Excellent shock absorption
2. Stable shock absorption
3. Precise height control
4. Wide range of sizes
5. Extend equipment life
6. Effectively reduce noise
7. Air spring shock absorbers are widely used

Other Single Convoluted Air Suspensions/Air Bags/Air Springs

The Drawing and Real Pictures of 1B4060

Manufacturing Facility