Contitech FS 210-10 DS G1/2 67404 Industrial Convoluted Rubber Air Shock Spring
AIRSUSTECH 1B10×1T Replaces These Air Bellows
Firestone W01-R58-4057, WO1-R58-4057
Firestone W01R584057, WO1R584057
Firestone W01 R58 4057, WO1 R58 4057
Dunlop Pneuride 10''×1
Dunlop Pneuride 10'×1
Dunlop Pneuride 10×1
Dunlop Springride SP2523
Dunlop Springride SP 2523
Dunlop Springride SP 25 23
Contitech FS 210-10 DS, FS210-10 DS
Contitech FS 21010 DS, FS21010 DS
Contitech FS 210 10 DS, FS210 10 DS
Norgren M/31101
Norgren M31101
Norgren M 31101
Parker 9109024
Product Specifications and Technical Datas
| [1] Maximum Outside Diameter | 270 mm |
| [2] Installation Space | 300 mm |
| [3] Cover Plate Width | 210 mm |
| [4] Center Distance | 181 mm |
| [5] Screw Type | 4-M10 |
| [6] Compressed Height | 50 mm |
| [7] Extended Height | 150 mm |
| [8] Material | rubber and steel |
Vibration isolation - dynamic characteristics values
| Pressure P [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Force (Load) [kN] | 6.9 | 9.4 | 11.9 | 14.4 | 16.9 | 19.3 | 3.4 |
| Spring Rate [N/cm] | 203 | 257 | 313 | 369 | 428 | 481 |
| Natural Frequency [Hz] | 2.76 | 2.6 | 2.6 | 2.5 | 2.5 | 2.5 |
Pneumatic application - static characteristic values
| Pressure p | [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol.[l] |
| Height H [mm] | 120 | 6.94 | 9.41 | 11.9 | 14.4 | 16.9 | 19.3 | 3.4 |
| 100 | 8.94 | 12.1 | 15.2 | 18.3 | 21.4 | 24.4 | 2.9 |
| 80 | 10.9 | 14.6 | 18.3 | 22 | 25.7 | 29.3 | 2.2 |
| 60 | 12.2 | 16.4 | 20.4 | 24.6 | 28.7 | 32.7 | 1.4 |
Important Safety Guidelines for Air Spring Installation
To ensure optimal performance and safety when installing AIRSUSTECH air springs, please adhere to the following critical precautions:
1. Pressurization Requirements
Air springs must never be pressurized without proper external restraint from either a structural frame or appropriate load support.
Unrestricted inflation can lead to uncontrolled expansion and potential component failure.
2. Stroke Limitation
Mechanical stops (bump stops/external stops) are mandatory to prevent over-extension or over-compression.
When stacking multiple air springs, ensure proper alignment and secure fixation to avoid instability.
3. Operating Pressure Range
Air springs operate as single-acting actuators and must not be subjected to vacuum or sub-atmospheric pressure conditions.
Monitor for potential overpressure situations during rapid compression events.
4. Additional Safety Measures
Always verify system pressure ratings before installation
Use appropriate mounting hardware to prevent movement under load
Regularly inspect for signs of wear or fatigue
Failure to follow these guidelines may compromise system integrity and void product warranties.
For detailed installation instructions or technical support, consult the product manual or contact our engineering team.
The Real Photos
Factory Workshop
Product Tags:
|
|
Contitech FS 210-10 DS G1/2 67404 Industrial Convoluted Rubber Air Shock Spring Images
|
